Angle calculator
Revolutions to Degrees Converter
Convert revolutions (rev) to degrees (deg) with the exact angle formula, worked examples, and a common-values table.
Exact conversion
Revolutions to degrees formula
deg = rev × 360
1 rev equals 360 deg. 10 rev equals 3600 deg.
About these units
- rev
- Revolution (rev) is a angle unit used in this converter.
- deg
- Degrees, the most common angle unit.
Before you use the result
rev to deg context and checks
- Best use
- Use angle conversions for geometry, surveying, machining, slope, and navigation notes where the source is a rotation or bearing.
- Common mistake
- Do not mix angular units with percent grade unless the page explicitly handles the tangent relationship.
- Precision note
- Keep extra digits until the final result because small angle differences can matter in layout, optics, and slope work.
Example check: 1 rev converts to 360 deg. Use this known value to sanity-check a spreadsheet, homework solution, spec sheet, or manual calculation.
Revolutions to degrees conversion table
| rev | deg |
|---|---|
| 1 rev | 360 deg |
| 5 rev | 1800 deg |
| 10 rev | 3600 deg |
| 25 rev | 9000 deg |
| 50 rev | 18,000 deg |
| 100 rev | 36,000 deg |
Quick answer: 1 rev = 360 deg. Use the table below for common values, then keep both unit symbols visible when copying the result.
FAQ8 common questions for this calculator.
FAQs
How do I convert revolutions to degrees?+
Use this formula: deg = rev × 360. Enter the rev value and the calculator applies the relationship immediately.
How many deg are in 1 rev?+
1 rev equals 360 deg.
What is 10 rev in deg?+
10 rev equals 3600 deg. The displayed result may be rounded, while the calculator keeps full precision internally.
Can I convert degrees back to revolutions?+
Yes. Use Swap in the converter to reverse the units and calculate deg to rev.
How does the Revolutions to Degrees Converter calculate the result?+
For the Revolutions to Degrees Converter, it uses the Revolutions to degrees formula: deg = rev × 360. 1 rev equals 360 deg. 10 rev equals 3600 deg.
What information do I need to use the Revolutions to Degrees Converter?+
Enter the values requested by the form, keep units consistent, and use the displayed assumptions to decide whether the Revolutions to Degrees Converter matches your scenario.
How accurate is the Revolutions to Degrees Converter?+
Revolutions to Degrees Converter is accurate for the values and assumptions entered on this page. It uses the Revolutions to degrees formula. Recheck the inputs before relying on the estimate.
What should I check before using the Revolutions to Degrees Converter result?+
For the Revolutions to Degrees Converter, check that the units, inputs, and assumptions match your situation. Change one input at a time to understand which values have the largest effect on the result.
RelatedNearby angle converters that share units or direction.
Angle conversion tools
Angle guide
How to use the Revolutions to Degrees Converter
Convert revolutions (rev) to degrees (deg) with the exact angle formula, worked examples, and a common-values table. Use the instant result for the revolutions to degrees conversion, then check the common-value table, reverse link, and unit notes before copying the answer.
- 1
Enter Revolutions
Type the revolutions value you want to convert. Decimal values work when you need a partial unit.
- 2
Read Degrees
Use the main result for the exact degrees value, then scan the common-value table for nearby reference points.
- 3
Confirm Revolutions to Degrees
Confirm the revolutions to degrees unit symbols before using the number in a report, product listing, invoice, or assignment.