Angle calculator
Degrees to Revolutions Converter
Convert degrees (deg) to revolutions (rev) with the exact angle formula, worked examples, and a common-values table.
Exact conversion
Degrees to revolutions formula
rev = deg × 0.00277777778
1 deg equals 0.00277777778 rev. 10 deg equals 0.0277777778 rev.
About these units
- deg
- Degrees, the most common angle unit.
- rev
- Revolution (rev) is a angle unit used in this converter.
Before you use the result
deg to rev context and checks
- Best use
- Use angle conversions for geometry, surveying, machining, slope, and navigation notes where the source is a rotation or bearing.
- Common mistake
- Do not mix angular units with percent grade unless the page explicitly handles the tangent relationship.
- Precision note
- Keep extra digits until the final result because small angle differences can matter in layout, optics, and slope work.
Example check: 1 deg converts to 0.00277777778 rev. Use this known value to sanity-check a spreadsheet, homework solution, spec sheet, or manual calculation.
Degrees to revolutions conversion table
| deg | rev |
|---|---|
| 1 deg | 0.00277777778 rev |
| 5 deg | 0.0138888889 rev |
| 10 deg | 0.0277777778 rev |
| 25 deg | 0.0694444444 rev |
| 50 deg | 0.138888889 rev |
| 100 deg | 0.277777778 rev |
Quick answer: 1 deg = 0.00277777778 rev. Use the table below for common values, then keep both unit symbols visible when copying the result.
FAQ8 common questions for this calculator.
FAQs
How do I convert degrees to revolutions?+
Use this formula: rev = deg × 0.00277777778. Enter the deg value and the calculator applies the relationship immediately.
How many rev are in 1 deg?+
1 deg equals 0.00277777778 rev.
What is 10 deg in rev?+
10 deg equals 0.0277777778 rev. The displayed result may be rounded, while the calculator keeps full precision internally.
Can I convert revolutions back to degrees?+
Yes. Use Swap in the converter to reverse the units and calculate rev to deg.
How does the Degrees to Revolutions Converter calculate the result?+
For the Degrees to Revolutions Converter, it uses the Degrees to revolutions formula: rev = deg × 0.00277777778. 1 deg equals 0.00277777778 rev. 10 deg equals 0.0277777778 rev.
What information do I need to use the Degrees to Revolutions Converter?+
Enter the values requested by the form, keep units consistent, and use the displayed assumptions to decide whether the Degrees to Revolutions Converter matches your scenario.
How accurate is the Degrees to Revolutions Converter?+
Degrees to Revolutions Converter is accurate for the values and assumptions entered on this page. It uses the Degrees to revolutions formula. Recheck the inputs before relying on the estimate.
What should I check before using the Degrees to Revolutions Converter result?+
For the Degrees to Revolutions Converter, check that the units, inputs, and assumptions match your situation. Change one input at a time to understand which values have the largest effect on the result.
RelatedNearby angle converters that share units or direction.
Angle conversion tools
Angle guide
How to use the Degrees to Revolutions Converter
Convert degrees (deg) to revolutions (rev) with the exact angle formula, worked examples, and a common-values table. Use the instant result for the degrees to revolutions conversion, then check the common-value table, reverse link, and unit notes before copying the answer.
- 1
Enter Degrees
Type the degrees value you want to convert. Decimal values work when you need a partial unit.
- 2
Read Revolutions
Use the main result for the exact revolutions value, then scan the common-value table for nearby reference points.
- 3
Confirm Degrees to Revolutions
Confirm the degrees to revolutions unit symbols before using the number in a report, product listing, invoice, or assignment.