Angle calculator
Arcminutes to Degrees Converter
Convert arcminutes (arcmin) to degrees (deg) with the exact angle formula, worked examples, and a common-values table.
Exact conversion
Arcminutes to degrees formula
deg = arcmin × 0.0166666667
1 arcmin equals 0.0166666667 deg. 10 arcmin equals 0.166666667 deg.
About these units
- arcmin
- Arcminute (arcmin) is a angle unit used in this converter.
- deg
- Degrees, the most common angle unit.
Before you use the result
arcmin to deg context and checks
- Best use
- Use angle conversions for geometry, surveying, machining, slope, and navigation notes where the source is a rotation or bearing.
- Common mistake
- Do not mix angular units with percent grade unless the page explicitly handles the tangent relationship.
- Precision note
- Keep extra digits until the final result because small angle differences can matter in layout, optics, and slope work.
Example check: 1 arcmin converts to 0.0166666667 deg. Use this known value to sanity-check a spreadsheet, homework solution, spec sheet, or manual calculation.
Common arcmin to deg conversion table
| arcmin | deg |
|---|---|
| 1 arcmin | 0.0166666667 deg |
| 5 arcmin | 0.0833333333 deg |
| 10 arcmin | 0.166666667 deg |
| 25 arcmin | 0.416666667 deg |
| 50 arcmin | 0.833333333 deg |
| 100 arcmin | 1.66666667 deg |
FAQ8 common questions for this calculator.
FAQs
How do I convert arcminutes to degrees?+
Use this formula: deg = arcmin × 0.0166666667. Enter the arcmin value and the calculator applies the relationship immediately.
How many deg are in 1 arcmin?+
1 arcmin equals 0.0166666667 deg.
What is 10 arcmin in deg?+
10 arcmin equals 0.166666667 deg. The displayed result may be rounded, while the calculator keeps full precision internally.
Can I convert degrees back to arcminutes?+
Yes. Use Swap in the converter to reverse the units and calculate deg to arcmin.
How does the Arcminutes to Degrees Converter calculate the result?+
For the Arcminutes to Degrees Converter, it uses the Arcminutes to degrees formula: deg = arcmin × 0.0166666667. 1 arcmin equals 0.0166666667 deg. 10 arcmin equals 0.166666667 deg.
What information do I need to use the Arcminutes to Degrees Converter?+
Enter the values requested by the form, keep units consistent, and use the displayed assumptions to decide whether the Arcminutes to Degrees Converter matches your scenario.
How accurate is the Arcminutes to Degrees Converter?+
Arcminutes to Degrees Converter is accurate for the values and assumptions entered on this page. It uses the Arcminutes to degrees formula. Recheck the inputs before relying on the estimate.
What should I check before using the Arcminutes to Degrees Converter result?+
For the Arcminutes to Degrees Converter, check that the units, inputs, and assumptions match your situation. Change one input at a time to understand which values have the largest effect on the result.
RelatedNearby angle converters that share units or direction.
Angle conversion tools
Angle guide
How to use the Arcminutes to Degrees Converter
Convert arcminutes (arcmin) to degrees (deg) with the exact angle formula, worked examples, and a common-values table. Use the instant result for the arcminutes to degrees conversion, then check the common-value table, reverse link, and unit notes before copying the answer.
- 1
Enter Arcminutes
Type the arcminutes value you want to convert. Decimal values work when you need a partial unit.
- 2
Read Degrees
Use the main result for the exact degrees value, then scan the common-value table for nearby reference points.
- 3
Confirm Arcminutes to Degrees
Confirm the arcminutes to degrees unit symbols before using the number in a report, product listing, invoice, or assignment.