Speed calculator
Feet Per Second to Meters Per Second Converter
Convert feet per second (ft/s) to meters per second (m/s) with the exact speed formula, worked examples, and a common-values table.
Exact conversion
Feet Per Second to meters per second formula
m/s = ft/s × 0.3048
1 ft/s equals 0.3048 m/s. 10 ft/s equals 3.048 m/s.
About these units
- ft/s
- Feet/second (ft/s) is a speed unit used in this converter.
- m/s
- Meters per second, the SI-derived speed unit for meters traveled each second. It is common in physics, engineering, sports timing, and scientific calculations, and it is different from acceleration units such as m/s^2.
Before you use the result
ft/s to m/s context and checks
- Best use
- Use speed conversions for travel, training, weather, aviation, marine, and physics values where distance is measured per unit of time.
- Common mistake
- Do not use speed pages for simple distance conversion. Nautical miles per hour, kilometers, and knots describe different ideas.
- Precision note
- Keep units attached to the value so a speed result is not mistaken for distance, pace, or acceleration.
Example check: 1 ft/s converts to 0.3048 m/s. Use this known value to sanity-check a spreadsheet, homework solution, spec sheet, or manual calculation.
Common ft/s to m/s conversion table
| ft/s | m/s |
|---|---|
| 1 ft/s | 0.3048 m/s |
| 5 ft/s | 1.524 m/s |
| 10 ft/s | 3.048 m/s |
| 25 ft/s | 7.62 m/s |
| 50 ft/s | 15.24 m/s |
| 100 ft/s | 30.48 m/s |
FAQ8 common questions for this calculator.
FAQs
How do I convert feet per second to meters per second?+
Use this formula: m/s = ft/s × 0.3048. Enter the ft/s value and the calculator applies the relationship immediately.
How many m/s are in 1 ft/s?+
1 ft/s equals 0.3048 m/s.
What is 10 ft/s in m/s?+
10 ft/s equals 3.048 m/s. The displayed result may be rounded, while the calculator keeps full precision internally.
Can I convert meters per second back to feet per second?+
Yes. Use Swap in the converter to reverse the units and calculate m/s to ft/s.
How does the Feet Per Second to Meters Per Second Converter calculate the result?+
For the Feet Per Second to Meters Per Second Converter, it uses the Feet Per Second to meters per second formula: m/s = ft/s × 0.3048. 1 ft/s equals 0.3048 m/s. 10 ft/s equals 3.048 m/s.
What information do I need to use the Feet Per Second to Meters Per Second Converter?+
Enter the values requested by the form, keep units consistent, and use the displayed assumptions to decide whether the Feet Per Second to Meters Per Second Converter matches your scenario.
How accurate is the Feet Per Second to Meters Per Second Converter?+
Feet Per Second to Meters Per Second Converter is accurate for the values and assumptions entered on this page. It uses the Feet Per Second to meters per second formula. Recheck the inputs before relying on the estimate.
What should I check before using the Feet Per Second to Meters Per Second Converter result?+
For the Feet Per Second to Meters Per Second Converter, check that the units, inputs, and assumptions match your situation. Change one input at a time to understand which values have the largest effect on the result.
RelatedNearby speed converters that share units or direction.
Speed conversion tools
Speed guide
How to use the Feet Per Second to Meters Per Second Converter
Convert feet per second (ft/s) to meters per second (m/s) with the exact speed formula, worked examples, and a common-values table. Use the instant result for the feet per second to meters per second conversion, then check the common-value table, reverse link, and unit notes before copying the answer.
- 1
Enter Feet Per Second
Type the feet per second value you want to convert. Decimal values work when you need a partial unit.
- 2
Read Meters Per Second
Use the main result for the exact meters per second value, then scan the common-value table for nearby reference points.
- 3
Confirm Feet Per Second to Meters Per Second
Confirm whether you are converting speed, distance, or time; similar-looking route and speed units can answer different questions.