Construction/Home calculator
Brick Calculator Material Estimator
Estimate bricks needed from wall area, brick size, mortar joint, and waste.
FormulaBricks = wall area / brick face area x waste factor
Formula
Brick count
Openings, bond pattern, cuts, corners, and supplier pack sizes can change the final quantity.
Bricks = wall area / brick face area x waste factor
Wall area divided by brick face area gives an estimated brick count.
FAQ6 common questions for this calculator.
FAQs
Why include mortar joint?+
Mortar spacing increases the effective face area of each brick.
Does this estimate mortar?+
No. It estimates brick count only.
How does the Brick Calculator calculate the result?+
For the Brick Calculator, it uses the Brick count: Bricks = wall area / brick face area x waste factor. Wall area divided by brick face area gives an estimated brick count.
What information do I need to use the Brick Calculator?+
For the Brick Calculator, enter wall area, brick size, mortar joint, and waste. Keep the units consistent with the calculator fields and compare your setup with the worked example on the page.
How accurate is the Brick Calculator?+
Brick Calculator is a material estimate based on the dimensions, unit system, and allowance values entered. It uses the Brick count, but cuts, openings, site conditions, pack sizes, and code requirements can change the final quantity.
What should I check before using the Brick Calculator result?+
For the Brick Calculator, check wall area, brick size, mortar joint, and waste, unit system, waste allowance, openings, site conditions, and supplier pack size. Use the estimate as a planning quantity before ordering materials.
RelatedNearby construction/home calculators for the next step after Brick Calculator.
Construction/Home calculators to compare next
Construction/Home guide
How to use the Brick Calculator
Estimate bricks needed from wall area, brick size, mortar joint, and waste. The page also explains the brick count and shows a practical example: Wall area divided by brick face area gives an estimated brick count.
- 1
Enter your details
Enter wall area, brick size, mortar joint, and waste, then complete any other fields shown in the calculator.
- 2
Check the calculation
Review the result alongside the brick count: Bricks = wall area / brick face area x waste factor.
- 3
Compare scenarios
Change one or more inputs to see how they affect the brick Calculator result before you use the estimate.